Piller Lincoln Emblem

[GrayGhost1]

GrayGhost01
Guess you really like stickers?
oh, and i dont mean to be a dick, but... that isn't a "strut cover" in you pic, its the EVAP solenoid cover. http://www.cardomain.com/memberpage/510004/10

Understand what it's covering. However, try to explain that to a customer where the plate goes. The cover does go on top of the strut bolts so in essence it's a strut/EVAP solenoid cover.

As for stickers, what exactly are you talking about?

 

[John_P007]

Here is the L I N C O L N emblem. Thanks Ghost for the help.

 

[John_P007]

Gray Ghost that carbon piece on your steering wheel, is that a sticker or what? If it is is it over the leather or do you have a wood wheel?

 

[John_P007]

Here is an other picture of my L I N C O L N emblem. Thanks again Ghost.

 

[GrayGhost1]

Gray Ghost that carbon piece on your steering wheel, is that a sticker or what? If it is is it over the leather or do you have a wood wheel?

No that is a complete overhaul of the steering wheel. I sent an old steering wheel to www.american-stitches.com and had them put the carbon fiber insert in the steering wheel.

The LINCOLN emblem looks great!

 

[JoshMcMadMac]

Both look really cool. Great work!

 

[ocorral20]

orlando

Thanks! Out of all the mods I've done to my car I get the most compliments from that $15 emblem. Go figure!

Ken

hey ghost i am looking for the V8 emblem that is on the back tail light on a 2000 lincoln ls any idea what the part # is or when i can get it?
thanks alot i would apreciate your help

 

[LSjake]

GrayGhost,
Wow!!! That's a sharp LS. I've only owned mine for about 4 months and those pics are pretty close to what I had in mind for mine.

 

[Quik LS]

hey ghost i am looking for the V8 emblem that is on the back tail light on a 2000 lincoln ls any idea what the part # is or when i can get it?
thanks alot i would apreciate your help

FordParts Network –

• • 2w4z-5442528-aa (LSE emblem)= 27.99
  • 1W4Z-5442528-AA ('LS V8' emblem)= 19.99
  • XW4Z-16098-AA ('Lincoln' trunk emblem) = 11.99

FordPartsNetwork.com - Torrie.

 

[GrayGhost1]

GrayGhost,
Wow!!! That's a sharp LS. I've only owned mine for about 4 months and those pics are pretty close to what I had in mind for mine.

Thanks. It's still a work in progress but I'm having fun with it.

 

[luckieleo]

When you get the emblem it comes ready to mount. No need to have it spaced because it comes with plastic on top for easy mount. When you get it you'll see. Here is the only picture I have of the emblem:

i had to bring back up this old thread. i just ordered this thru fordpartsnetwork. it was $15.99 with $7.99 shipping. cant wait to see what it looks like on the wood. looks REALLY sharp with the carbon fiber behind it.

YAY!! cant wait to get it. :monkey:

 

[jdsimons]

can you let me know what you think about it with the wood grain. Cause... man that looks tight.. But i only have the wood not carbon fiber. Hope it will look that good.

 

[SurfjaxLS]

When you get the emblem it comes ready to mount. No need to have it spaced because it comes with plastic on top for easy mount. When you get it you'll see. Here is the only picture I have of the emblem:

Any ideas on where else to mount the logo. I have the factory wood trim and don't wish to replace/cover it witch a dash kit. I don't think it would look good on the wood, but what about the glove box or something? Tell me what you think.

 

[SurfjaxLS]

can you let me know what you think about it with the wood grain. Cause... man that looks tight.. But i only have the wood not carbon fiber. Hope it will look that good.

Completely missed your post. I guess mine above is a bit redundant.

 

[John_P007]

What about the area above the wood? like to the left of the passenger side vent?

 

[SurfjaxLS]

What about the area above the wood? like to the left of the passenger side vent?

I think that would look nice.