"Ray Switch" Now Available! Place your order here!

IMG_0194.gif


IMG_0199.gif


I wonder if they coulda stuck the harness and connectors any further in the back. LOL

:cool:
 
Welp,within the month of October I'll have enough money to get one. I'm just tryig to get a lil extra money on top of the extra money I'm trying to get lol
 
Ok guys,

I spoke too soon, after counting my parts. I have enough parts to finish the two I'm currently working on, plus the one for isaiah3g.

After those three, I have enough parts to build ONE more. After that one, I'll start building a list of switches so that I can order parts again.

Translation - It may take some time before I start producing them again. So if you want one, get your name to me quick!
 
I would like to order one before their gone. Just curious how low dose it make the car. Would it be roughly the same height as when cruising over 60 mph
 
topher5150 said:
I would like to order one before their gone. Just curious how low dose it make the car. Would it be roughly the same height as when cruising over 60 mph
Click to expand...


No, lower! Basically it sits the car as low as it can possibly go. I don't recommend driving over 15 mph with the system bled, even then, you're running the risk of ruining your front suspension components. It was only really meant for a sick looking stance while parked. You have the last one if you want it!
 
topher5150 said:
I would like to order one before their gone. Just curious how low dose it make the car. Would it be roughly the same height as when cruising over 60 mph
Click to expand...

I dont know if you realized or not but there is a bunch of pictures in this thread as well as the tribute to ray thread. I've also posted some recent ones of mine.

IMG_0059-1.gif




IMG_0074-1.gif



Its tuckin'
 
Its hard to tell as its sitting in an unlevel rock driveway on a hill. :p
 
itsnick6969 said:
do you have the system that will do the front and back by themselves yet?
Click to expand...

I have built one so far, it's on my car, it's not quite perfected yet but I really haven't spent any time working on it since it was installed, I really have only used it twice since I installed it. I still need to work on perfecting the design, there are still some issues I would like to resolve. I'd like to add the 1 sec delay for airing the system up, like the factory system does. I know how I want to do it but haven't set down and built it yet.

I also, don't have any idea on what the cost of one of these units would be, I would need to sit down and figure up all the parts I used to get a rough idea.
 
let me know when you get it all figured out. just pm me a price and would your system work with the ashab8 so you would be able to raise the rear and keep the front stock height? thanks
 
itsnick6969 said:
let me know when you get it all figured out. just pm me a price and would your system work with the ashab8 so you would be able to raise the rear and keep the front stock height? thanks
Click to expand...

Yes, it would work but realize that my kit will cause the system to throw the check air ride message and it would need to be reset if you were wanting to go back to the factory system or make adjustments with the asham8. Not really that big of a deal but thought I should let you know just in case. I don't spend my time dealing with all the electronics of the system, the asham8 actually tricks the system, I just override it.
 
Just wondering if you had any takers for that last kit you have? I would like to purchase one and I can have the money to you on Friday.
 
I would also like a kit I can send the money by pay pal just send me the info. I am new and not sure how this works..
 
OfficerHA said:
Just wondering if you had any takers for that last kit you have? I would like to purchase one and I can have the money to you on Friday.
Click to expand...

russofour said:
I would also like a kit I can send the money by pay pal just send me the info. I am new and not sure how this works..
Click to expand...

Guys, I'm currently out of parts for the "Ray Switch", at this moment I'm not sure when I will get around to ordering more parts but I will let you know when I am.
 
i was wondering if u had any updates on the switch that allows u to do both seperate.
 
kylecm85 said:
i was wondering if u had any updates on the switch that allows u to do both seperate.
Click to expand...

I only have the prototype, it's installed on my car but I've never really sat down to finish the setup. I honestly haven't used it since I put it in. I'm not really for sure if I will produce this unit, because of all the wiring that needs to be done. It wasn't an easy one to build and don't know that I'd be interested in building more. Maybe if I could come up with a simpler method of wiring it, I might consider it. Also, I haven't even sat down to figure out what I have in it for costs. I'd figure this unit will cost at least twice as much as the "Ray Switch", possibly more.
 
i understand i just dont think my car would work all the way aired out on 20's i think it would sit on the wheels and not tuck like i wish it would but if u ever get to finish it and want to sell it i would pay the extra to have that setup.
 
kylecm85 said:
i understand i just dont think my car would work all the way aired out on 20's i think it would sit on the wheels and not tuck like i wish it would but if u ever get to finish it and want to sell it i would pay the extra to have that setup.
Click to expand...

one thing you need to realize is this wont be a "fast bag setup" more like a slow bag setup normal lift time from a full drop (with mine when it was stock) was 90 sec and even slower to drop, the rear takes FOREVER!!!
 
i know it would not be even close to a fast bag setup. I just wanted something that i could use at shows to lower it for that aggresive look but i am also interested in the sensor lowering just dont know how to do it.
 
You must log in or register to reply here.

Members online

No members online now.
Total: 227 (members: 0, guests: 227)
Back
Top