I have a questions, does anyone know of a rotor that is the same size as the factory rotors front and rear of a gen 2. I asked because I want to pick up some front hubs from a cobra and put them on and use the factory brakes and I found a shop here that can press new hubs and bearings in the rear so since you can now purchase just the cobra hub all I need is a set of rotors that will work. Basically swapping from 5x108 to 5x114 nut with out the added expense of new brakes calipers,beakers and such. Any help with part numbers and or yr of car will be helpful
rear and front rotors for gen 2...
- Thread starter manish
- Start date
Blenderhead
Well-Known LVC Member
The only way is to find a shop that will re-drill your rotors with the cobra bolt pattern. There is no factory rotor that will fit right with your stock brakes that has a 5x4.5" pattern.
slowmkviii
Dedicated LVC Member
^^^^+1
a re-drill of your stock rotors will be the cheapest rout
a re-drill of your stock rotors will be the cheapest rout
cadillackman
Dedicated LVC Member
There's gotta be a good machine shop left somewhere up there.
BAD97LSC
Dedicated LVC Member
we have a mill in my shop if you cant find anyone locally to do it for you, i can pick up new rotors for you, have my buddy mill them with the right pattern, and ship them to you, it wont be the cheapest route for you, but just giving you the option.
kustomizingkid
Dedicated LVC Member
Rotors are hubcentric so the holes don't have to be perfect... the rears though are a problem... mark rotors use a smaller rear hub...
hey Jamie shot me a price for front and rear rotors shipped to Detroit
I'm gonna keep trying to see if there is a shop here that can do it.
lincolnboy
Dedicated LVC Member
Has anyone tried sport tbird rotor fronts.
DLF
Dedicated LVC Member
Same as stock Mark VIII rotors......
lincolnboy
Dedicated LVC Member
I just haven't heard of any one use the tbird sport front rotors.