Ok here's the spec: 2001 LS V8 8.0" differential case, 8.8" 02' Mustang GT 28 spline Lsd, 8.0" 3.58 ring and pinion. So here's the question, I'm about to redo my rear end and I came across a site that specializes in drivetrain parts. What I need to know is if this part is compatible with my current set up specifically if it will bolt up to my 8.8" 28 spline lsd. The specs are listed below.
SPECIFICATIONS:
• RG DIAMETER 8""
• 10 7/16" X 20 RH THREADED RING GEAR BOLTS
• PINION DIAMETER 1.188" 25 SPLINES
• NO CASE BREAKS
• AXLE SPLINE COUNT 28
• 10-Drop Out Style
Ford 8" Performance(3.80 Ratio)
$188.95
F880380
RATIO: 3.80
MANUFACTURER: Motive Gear Performance
MATERIAL: 8620 Heat Treated Alloy
CASE BREAKS: NONE
SPECIFICATIONS:
• RG DIAMETER 8""
• 10 7/16" X 20 RH THREADED RING GEAR BOLTS
• PINION DIAMETER 1.188" 25 SPLINES
• NO CASE BREAKS
• AXLE SPLINE COUNT 28
• 10-Drop Out Style
Ford 8" Performance(3.80 Ratio)
$188.95
F880380
RATIO: 3.80
MANUFACTURER: Motive Gear Performance
MATERIAL: 8620 Heat Treated Alloy
CASE BREAKS: NONE