Steeper gears

2002_lincolnLS

2002_lincolnLS

Custom User Title
Joined
Sep 17, 2009
Messages
3,665
Reaction score
29
Location
canton
So I was wanting to get steeper gears for the differential. I have read sometime ago that very early LSs came with like ~ 3:73 verses what the rest have ( not entirely sure what I have 3.5x I assume). Would it be worth it to try to track one of these down? Does anyone make anything gear wise for our diff, not nessicarily LSD wise but just gears?

I don't want anything crazy, just something to help off the line. I don't really care to do the 8.8 swap as that may be more costly than I want, if its the only way to get more gear, then that's what I will have to get.

Any help getting pointed in the right direction is helpful. I know the LSD topic has been covered but I never really remember reading much on gears themselves.

Thanks folks
 
VERY early V8: 3.58
All other '00-'02 V8: 3.31
All auto V6: 3.58
Manuals: 3.07
All '03+: 3.58

This is from memory. Joe?
 
LS4me said:
VERY early V8: 3.58
All other '00-'02 V8: 3.31
All auto V6: 3.58
Manuals: 3.07
All '03+: 3.58

This is from memory. Joe?
Click to expand...

ah, okay, I was thinking I had the 3.58 and the early ones were steeper.

Correct me if I am wrong but the second gen has different splines for the axles so I couldn't do a straight pumpkin swap but i should be able to grab the gears and install in mine.

I think if I can Pull A Part one cheaply it would be well worth it
 
hite337 said:
IIRC isnt the pinion shaft longer in the 2nd gen?
Click to expand...

Hopefully not, unless a gen II drive shaft fits in the gen one. Wouldn't really be worth it to have a custom shaft built just to to a little more gear in
 
Well that helps! Well I will start looking for the ring and pinion to get an idea of the cost
 
I'm 99% sure anyways. When I did my LSD swap I accidently got a first gen 3.31. So I had the shop swap my 3.58 from my second gen into the first gen housing with LSD. They said the ring and pinions are interchangeable between generations.
 
RodLS said:
I'm 99% sure anyways. When I did my LSD swap I accidently got a first gen 3.31. So I had the shop swap my 3.58 from my second gen into the first gen housing with LSD. They said the ring and pinions are interchangeable between generations.
Click to expand...

I thought you couldn't do a LSD swap in the stock housing. My understanding was you had to go with the 8.8 inch diff. I could be wrong.

what LSD did you go with? If its not to costly it may be worth it to do that while I have it apart.
 
Well then I can do 3.58s from a second gen in a first gen housing with an LSD, or would only really e worth it to do like 3.73's I think the XKR has 3.73 or similar I will check on the jag forum
 
2002_lincolnLS said:
Well then I can do 3.58s from a second gen in a first gen housing with an LSD, or would only really e worth it to do like 3.73's I think the XKR has 3.73 or similar I will check on the jag forum
Click to expand...

This is what I'd like to have.. My car lugs too much, even on the highway, and feels geared way too tall from a stop..
 
So just went back and found that old thread about the LSD swap, I think tht is way more costly and involved that I would want to go for gears. I will go a head and just do 3.58's
 
What is your intention? To get a higher gear ration?

If you have a 3.31 and want to go to a 3.58 in a first gen its just a ring and pinion swap. Same with a second gen.

If you want a LSD, when you swap gears it will be the perfect time to put one in. All you'll need is to find a Ford 8.8 28 spline LSD. I think the trac-loks can be found for around $200.
 
Here is a 4.11 8.8 next to a 3.31 8.0 from a LS.

IMG_8470_zps8a4b781f.jpg
 
RodLS said:
What is your intention? To get a higher gear ration?

If you have a 3.31 and want to go to a 3.58 in a first gen its just a ring and pinion swap. Same with a second gen.

If you want a LSD, when you swap gears it will be the perfect time to put one in. All you'll need is to find a Ford 8.8 28 spline LSD. I think the trac-loks can be found for around $200.
Click to expand...

well really just to get more gear, I want a better launch, and figure if the 3.58's will fit right in it may be the way to go. I don't want to spend the coin on it to do 8.8 gears, just doesn't seem worth it so I will keep my eye put for the 3.58s
 
You must log in or register to reply here.

Members online

No members online now.
Total: 336 (members: 0, guests: 336)
Back
Top