Just put a transmission in my gen 1 ls8 after a couple months of it sitting without one. When I put the new one in I decided to seach online and make sure I was hooking the cooler lines back up correctly since it had been a while. When I searched for a diagram I found the autozone repair diagram witch shows the lines crossing and that didn't seem right to me so I looked on fordparts.com and it looks like they don't cross on their diagram. So now I'm not sure. If someone could let me know if the inside line goes to the bottom and the outer line goes to the top witch makes the most sense to me. or even better if someone could reach under and get me a pic of the trans lines running up to the trans I would apreciat it.