trans question please help

nh3junkie

LVC Member
Joined
May 18, 2007
Messages
19
Reaction score
0
Location
mexico
does any body have a list of the parts i will need for the:

1-2 accumulator change out
2-3 accumulator change out
seperator plate gaskets
and the j mod

what else do i need to accomplish this?
 
does any body have a list of the parts i will need for the:

1-2 accumulator change out
Heavy Duty Snap Ring Pliers
A big C-Clamp
New 1-2 Piston F7AZ-7F251-AA
Blue Upper Spring F75Z-7F284-AA

nh3junkie said:
2-3 accumulator change out
New 2-3 Piston F7AZ-7H292-AB
nh3junkie said:
seperator plate gaskets
F5AZ-7D100-A
F2VY-7C155-A
nh3junkie said:
and the j mod
Wire gauge (sized) drill bits. They're at ACE Hardware.

http://www.tccoa.com/articles/tranny/transmission/page13.shtml
http://www.tccoa.com/articles/tranny/transmission/page14.shtml
Drill Specs

http://www.tccoa.com/articles/tranny/shiftybusiness.html
http://www.tccoa.com/articles/tranny/transmission/shiftybusiness.shtml

nh3junkie said:
what else do i need to accomplish this?
Deep sump pan is a good idea F6AZ-7A194-A
Filter too F6AZ-7A098-A
New Mercon V (only if yours is old, or you're still using Mercon)

A bucket.
A really big/wide drain pan to place under the transmission pan when you remove it; it'll help you to not take an ATF bath.

 
tranny

this site is awesome, thank you so much for your help.

i got the parts on order
 

Members online

No members online now.
Back
Top