who mark

What's GPRS, negative 1nibble per second?

As much as I dislike Verizon, they have great data coverage, so when you get going again, I highly recommend a data card from them... well, not from them, they are made by Novatel, but through them.
 
Frogman said:
What's GPRS, negative 1nibble per second?

As much as I dislike Verizon, they have great data coverage, so when you get going again, I highly recommend a data card from them... well, not from them, they are made by Novatel, but through them.
Click to expand...

The GPRS was fast enough for the tracking system.
 
That list is staggering... but that is what it takes to build a full out car... Come to Boscobel with it next year!!!
 
That is just beautiful! Love it, love the mods. Seems you could have saved a few thousand by just getting forged internals on the Teksid and buying some clean used C heads. Since you can by polished and ported Eaton for under $500 and another $500 for the lower plenum and heat exchanger, no?

Don't take that as me criticizing at all, still love the work you did and the final result. :)
 
LaserSVT said:
That is just beautiful! Love it, love the mods. Seems you could have saved a few thousand by just getting forged internals on the Teksid and buying some clean used C heads. Since you can by polished and ported Eaton for under $500 and another $500 for the lower plenum and heat exchanger, no?

Don't take that as me criticizing at all, still love the work you did and the final result. :)
Click to expand...

You can do that now and highly recommend doing what you mentioned, 5 years ago... not so much, It was basically a wash. Stuff was much higher or not available back then. Plus I wanted to be first or one of the first to do a swap.

I did find an old clip of the car moving, I got stopped by the cops and got separated from the cruise. My car comes 30 seconds in.

YouTube - STLM Cruise 10/7/2007
 
hey laser wherewould i be able to find the internals for the teskid black and what year are the c heads? and btw did you find our about thr 3 cables for my dvd/gps
LaserSVT said:
That is just beautiful! Love it, love the mods. Seems you could have saved a few thousand by just getting forged internals on the Teksid and buying some clean used C heads. Since you can by polished and ported Eaton for under $500 and another $500 for the lower plenum and heat exchanger, no?

Don't take that as me criticizing at all, still love the work you did and the final result. :)
Click to expand...
 
94BLU8, I sent you the link for the power/speaker wires but the RCA will have to be ordered from Eclipse directly.
The "C" heads are 99+ Cobra heads and as far as forged internals you just would need a 96+ Cobra crank or a stick shift Mach1 crank. The rods you can get 03/04 Terminator rods or a forged rod of your choice. Pistons are available everywhere but you need to know the end goals before buying forged pistons. High compression for N/Z or lower for boost..... that was stupid of me, going C heads of course you want boost. :lol:

Get something that will keep the compression around 9:1
 
I sold a bike for over 30K before... actually two and to the same guy. Both were new 03 Screaming Eagle Gold Anv editions.
 
You must log in or register to reply here.

Members online

Total: 130 (members: 1, guests: 129)
Back
Top