Search results for query: *

Did you figure anything out with this, I have a very similar problem and am not sure what it is, but could use some help. It is kind of embarrassing to leave the cloud that it does. Thanks

Thanks for the help, that is what I figured just wanted to make sure.

Thanks for the help, it is the 5 spoke silver painted wheel. The reason I am asking, looking on ebay at auctions that have the actual parts interchange listed, they aren't interchangeable, and I wanted to make sure there wasn't a color change, or a slight cosmetic change that would make the...

I have an 02 LS Sport with the stock 5 spoke wheels. I just got new tires yesterday, and I have a bent rim. I am looking for a replacement and it appears that there is a difference between the 00-01 and the 02 and up version of the 5 spoke rim, does anyone know what it is. Better yet, does...

I am using a '96 Mark motor in a kit car, and wanted to know if someone could help me understand how the IMRC's work. I am running the engine with a '01 cobra wiring harness, so I don't have anything to hook up to the electrical plug coming off the actuators. The research I have done has told...

Yes it does.

Max at 5 star ford, one of the forum vendors who offers a discount to forum members. look on the right side of the screen. click the forums button and go to the bottom and click on the 5 star ford forum.

They are quite easy, easier than most since the spindle is aluminum, it doesn't use a narrow taper on the pin and lock itself into the spindle requiring a lot of work to get out. It uses a wide taper on the seat, then the rest of the pin is straight and comes out of the spindle very easily...

If they use the same bearing you should be fine with the 8.8 shim pack. You should not have a problem on the diff side of things, because the bearing snout on the diff will be the same, otherwise it wouldn't work. The place you could have a problem is on the race. If the 8.0 is a smaller...

I don't know the exact reason why I have the 2 sizes, but I know the car was wrecked at one point, and I am guessing it got half the supsension replaced from a junk yard car. Thanks

Has anyone used the 16 mm replacement ball joints that are for sale on e-bay. With searching I have seen that the 14mm from euromarque have been used with great success, but they don't have the 16mm ones. Next question, does anyone know what the difference is between the 2, other then the...

Unfortunately replacing your shocks won't help your rubbing problem, at least the one with 4 people in the car. Shocks don't support any weight, they just slow the rebound of the springs down. It may help your rub with 2 people in that it may slow down the suspension movement some and keep it...

You would definately want a machine shop, it can be done on a mill. The fronts will be a little tricky to hold, but it is doable. There rears will be really easy. I would say this would be a better option than trying to get wheels custom set up for the lincoln bolt pattern, then you would be...

What you can do is pull your hubs off and put a new set of holes for wheel studs on the mustang bolt center. They will fit in the spaces between the current studs. I almost did it on my car for my snow tires, I have a set of mustang wheels with snows on them, but found a set of lincoln wheels...

I am not sure who makes them, but you can get them all over the place, I am pretty sure they are an imported part, most likely from china, which makes getting them in a different bolt pattern a little harder. You would probably have better luck boring a new set of holes in your hubs for the...

When I did mine regulators, the same part was broken, but I think that part breaking is a result of a larger problem. What it looked like on mine was that the cable started to come loose which allowed that part to twist and break. I think there are a couple reasons the cable can come loose...

Those are from american muscle, which is a big mustang wheel place, don't know if they will do the right bolt pattern for you though. http://www.americanmuscle.com/bl20frwh1.html

Been there, when I did mine, it probably took me about 1/2 hour to find it. There is a hole for it, it is on a flat horizontal surface. You can just about see it, but not really, I believe I set the dipstick in as close as I could guess, and got under the car and felt around and found it from...

Well, what I am talking about is in the side gears of the carrier, if you look at the internal splines of the carrier, part way in there, will be a groove cut out. Then if you look on the splines for the axles that will be a ring about 3/16 of an inch from then end. The ring expands into the...

Well he said that is what he has, I wanted to make sure it wouldn't cause him problems if he installs it.