Mysterio505
Active LVC Member
i was wondering if there was any way of taking the old chorme trim on my ls and putting it on an lse front facia because when i put the lse body kit on i dont want the lose the chrome trim.
GrayGhost1 said:Looks great! The McLaren grille makes it look even better.
02V8Sport said:Thanks!! Hers a low down of the install. I may take pics just to show what Im talking about here if its unclear. Its a very simple job, I didnt get any instructions on how to do it, I just went at it and figured it all out quickly.
1. Remove all front bumper splash guard bolts from underside of the car.
2. Remove both headlights. Each has 3 bolts to hold them in.
3. Remove front air temp sensor and plastic cover that it sits on from top of bumper cover under the hood.
4. Remove inner wheel fender liner bolts that attach to front bumper.
5. Remove brackets that hold the bumper to the front fenders. They have 2 small bolts and are easily accessible with a very long 1/4 ratchet extension.
6. Pull bumper up and forward and it just pops off.
7. Once the bumper is removed, you will need to cut off the stock fog lamp connector and splice in a H8 connector for the different bulbs.
SVT Gator said:Thanks for starting this thread. I have been thinking about making this change to my '03 Premium Sport so I am happy to hear that it can be done without too much difficulty.
Can you provide the Ford part numbers for the new parts that are required with this change? The fog lights are different, right? Are there any different brackets or other attaching parts required? I would like to give my local parts guy a list and let him order everything.
By the way, was it tough to put the new bumper cover on and get it to line up with even gaps, etc.? Thanks for your help!
J3FF said:Bringing this back.
So if I were to buy an 03-05 LS and put the front bumper on it, it would be almost identicle to the LSE? I saw a nice 05 LSV8 at my local dealership with 15K on it. The only thing though, was that the bottom peices around the doors and the rear bumper were not painted. How did you get yours painted 02V8Sport?
LEOV5 said:Ray,
That's a real nice ride. I like all the up-grades. I will comment if you don't mind. I have the McClaren grill on my car too. I noticed that you can still see the holes that don't go all the way thru the grill opening. Now go get some black touch-up paint and paint those holes black to make them look like the rest. Aslo get some black duct tape and tape the hood opening around the under the grill to make it look black also. You will see my pictures later and get the idea of it.
Leo
02V8Sport said:Leo, thanks for the comment and the suggestions!! You have a BEAUTIFUL LS yourself. I just went to fill in the holes with black touchup and I painted the silver metal behind the grill with black spray paint so the silver doesnt come through. It does look much better now. Its the small details that get over looked but make a difference. Thanks!!
Before and After.
The lower grille you see is nothing more than gutter guard at WalMart. They come in black, white and green. It comes in a pack of 5 pieces. It matches the wholes of the McLaren grille really good. The length is about 36 inches so it will only fit the LSE front lower air dams.LeaSr77 said:Yea I have to agree with everyone, it looks nice. Click on the below link and there is a picture of the lower part of the McLaren grill. Yes they do make it. http://www.lincolndde.com/albums/lowermclarengrille/MCLAREN_WITH_WORDS.jpg
The Xetronic HID conversion kits do come in the 9145/H10 bulb size. Xetronic just added that to their inventory. I'll update the website for that bulb size.postalUT said:It's a shame the '06 bumper doesn't match up with the '02 LSE kit, because those fog lights look incredible.
By the way Ken, do you sell the HID conversion for the '02 LSE foglights? I didn't see it on there last time I checked
02V8Sport said:Yes, you can even put the 06 front bumper on a 00-02 as well. The LSE does have different moldings on the bottom of the car which are painted the same as the car color. The plain Sport moldings and LSE moldings are totally different in shape and material/plastic. My car was a plain 04 Sport. I bought all the lower moldings and bumper from Team Ford and had it all painted at a body shop. You will also need the painted rear license surround and front grille. The LSE also has all red tail lights, which I only have 2 of the 4 on so far in my pics. The last piece on the LSE is the spoiler. Its probably cheaper just to buy and LSE than to piece it together like I did.
You can replace the bumper and not change the headlights. The only drawback in keeping the early style headlights is that there will be a slight gap between the headlight and the bumper. You can see the pictures here:AnderbrA said:Going back to this, I am assuming that in order to replace the front of an 00-02, you would need the bumper and the headlights from the 06. Is that correct? or are there other items that need to be replaced?