Search results for query: *

  1. D

    Head Gasket Replacement after Stroker Build

    that is what i figured, the car was tuned by alternative auto a while ago and the meth is leaking it needs a new pump but is still working fine what is a retune going to run on this thing and should i take it to alternative auto again?? thanks for your help
  2. D

    Head Gasket Replacement after Stroker Build

    Definitely head gasket i put a brand new gasket at the housing and when i pulled the little cap off the crossover tube you could see the timing when the water was shooting out, and when i drained the oil there was a bit of water in there not a crazy amount aswell as a few pieces of the black...
  3. D

    Head Gasket Replacement after Stroker Build

    Yes both were checked and yes studs were used. last couple days i was driving it it would misfire under boost and i got a no start with no fuel at the motor until i unhooked the battery and plugged it back in and she fired right up and ran no problem, until i shut it off.
  4. D

    Head Gasket Replacement after Stroker Build

    Need some more help guys!! got the car all done and it popped the head gasket again after 1000 kms cooling system is pressurizing again, i used the stock mls gaskets should i use the 03 cobra gaskets they are a different part number???
  5. D

    Post your custom wheels

    245 45 ZR17 - Front 275 40 ZR17 - Rear
  6. D

    parking brake wont release when put in gear?

    possibly bad switch on the ebrake pedal??? not knowing that it is on???
  7. D

    OBD Port not working

    yes car was on and it is for an sct tuner I will check tonight after work to see if the lighter works thanks for all the input!
  8. D

    OBD Port not working

    Hey everyone, my 97's obd port is not working the fuse is fine when you plug something into it nothing gets power is there something else i should be checking?? thank you help is appreciated!
  9. D

    Glitch Ballast Not working

    adjustment did nothing and all connections are good I think I have a bad ballast :( this is crappy I took the only good one from any wreckers around here for the other one that I traded this one for, will have to find a new one I guess. thanks for everyones help
  10. D

    Glitch Ballast Not working

    those connections are all shrink wrapped and look good im going to mess with the adjustment does it matter what way i turn it? thanks everyone for your help i was hoping i would not have any neon problems with this ballast
  11. D

    Glitch Ballast Not working

    there is no visible damage inside it looks good, I will try the adjusting, when I got the car a couple months ago it worked but only with parking lights, and I have checked all the connections except the ones that connect to the bulb as they r taped up pretty good will look into those tomorrow...
  12. D

    Glitch Ballast Not working

    I hope it is wired up correctly it was on the car when I bought it, I did turn the dial but not a lot just a little both ways and nothing, Thanks For replying!
  13. D

    Glitch Ballast Not working

    Hey everyone i am having issues with my glitch ballast, all it does is flicker every few seconds any ideas?? thanks for you help
  14. D

    Head Gasket Replacement after Stroker Build

    That set is awesome I got those, ford wanted over 400 for the pair, thanks alot!
  15. D

    Head Gasket Replacement after Stroker Build

    thank you i will be picking them up from ford next week, is that something i can fix with the sct tuner?
  16. D

    Head Gasket Replacement after Stroker Build

    Hey Everyone, New to the forum here and looking for some advice on my new 1997 Mark VIII , I purchased the car not knowing the head gasket was gone (Cooling system pressurizing and coolant and oil mixing). This car was built about 6 years ago and you can see the mods in the Youtube Video below...
Back
Top