What did you do to your Mark VIII today?

Correct. I asked the parts guy to look while I fired it up for a second, and he saw the arm swing down some, it shouldn't do that. So I replaced the whole thing, it came with the pulley.
 
Snow is gone. Been driving the Mark. Feels good to be back in it after months of sitting out the winter.
 
Didn't get to drive her to work this morning :( Battery is dead for some reason. It's only a couple of years old. I guess I'll be taking the battery back to AZ tomorrow for warranty replacement. Drove dad's F-150 to work today.
 
Went to the DMV to register the new car, so I can be legal, and get it smogged. They gave me temp plates,good for 10 days, and said get it smogged, and come back for real plates. Never again. I've got plenty of cars that have 2 plates that won't mind sharing. About 4 miles to the smog place shouldn't be a problem. Tried to do things right, and it bit me right in the butt. A friend of mine used a repair plate and DMV yelled at him saying you can't do that. It's all about the $$$$$ Cost me $105 today and I have to go back. On a good note, went to the casino yesterday, and lady luck paid for another MK VIII.
 
ONLYTONY said:
Went to the DMV to register the new car, so I can be legal, and get it smogged. They gave me temp plates,good for 10 days, and said get it smogged, and come back for real plates. Never again. I've got plenty of cars that have 2 plates that won't mind sharing. About 4 miles to the smog place shouldn't be a problem. Tried to do things right, and it bit me right in the butt. A friend of mine used a repair plate and DMV yelled at him saying you can't do that. It's all about the $$$$$ Cost me $105 today and I have to go back. On a good note, went to the casino yesterday, and lady luck paid for another MK VIII.
Click to expand...

I love casino winnings! What game do you play?
 
Gave it a nice wash yesterday. Ran my ETAC test and came up all clear. Let some the kids at a trade school put on my wheel hubs, run my codes and test my battery. It failed the load test.
Bought this one
http://www.sears.com/diehard-platin...p-02851065000P?prdNo=8&blockNo=8&blockType=G8

DieHard Platinum 930 CCA. Originally $220, $183 online discount and I had a $50 gift card I got at my reception, total was $146 with tax.
 
OchoMarko said:
I love casino winnings! What game do you play?
Click to expand...
I like playing the ones that let me win. I've been doing slots mostly. Pic M Poker, a no brainer. You pick stack 1 or 2 that have 3 cards, 2 that are hidden, and that completes the hand. The good: pays on a pair of nines or better, and it pays double your bet. Sometimes you win, sometimes not. Winning's not hard, getting the money out of the casino is the trick.
 
Tried to do an ETAC test but nothing happens. I pressed floor and off at the same time and auto within 2 secs, and nothing. did I do the wrong sequence?
 
DAMMIT!!! Installed a brand new ballast and two new HID's in my low beams yesterday and only one of them will work :mad: Both worked at first and then the d/s light just went out and won't come back on. Don't know if it's a bad bulb, ballast, or wiring. The headlights on this car are driving me completely insane! If I had any hair left I'd be pulling it out!
 
thaywood said:
DAMMIT!!! Installed a brand new ballast and two new HID's in my low beams yesterday and only one of them will work :mad: Both worked at first and then the d/s light just went out and won't come back on. Don't know if it's a bad bulb, ballast, or wiring. The headlights on this car are driving me completely insane! If I had any hair left I'd be pulling it out!
Click to expand...

I think its about time you give up and send all remaining mark viiis and associated parts to the local junk yard. With the scrap value i'd suggest you go and buy one of these.

bicycle.jpg




I'm serious.
 
:lol: Nah. I love my Lincoln. She's just got a few little bugs to work out. I think it's a wiring issue. Shouldn't be too hard to fix once I calm down and think about it for a little while. Besides, riding a bicycle is just too damn much work...:rolleyes:
 
thaywood said:
:lol: Nah. I love my Lincoln. She's just got a few little bugs to work out. I think it's a wiring issue. Shouldn't be too hard to fix once I calm down and think about it for a little while. Besides, riding a bicycle is just too damn much work...:rolleyes:
Click to expand...

Seems like she gets new "bugs" multiple times a week.
 
Green Machine said:
Tried to do an ETAC test but nothing happens. I pressed floor and off at the same time and auto within 2 secs, and nothing. did I do the wrong sequence?
Click to expand...

I had the same issue. Finally figured out you press FLR and OFF at the same time, THEN you must let go of both buttons, THEN press AUTO within 2 seconds. Make sure it's not below 35 degrees in your cabin.

Cleaned my Headlights, cleaned the chome 19 wheels, grabbed some rainx wipes, and put in TRICO Onyx Wiperblades.

I used a 16 megapixel camera so you can click on the pics to see full detail.

Rims front after, rear before
dirtywheel.jpg

Click For full size
cleanwheel.jpg

Click for full size

Headlights after I did drivers side, and then both done. Passanger came out nicer. They have moisture inside them.
frontdirty.jpg

Click for full size
frontclean.jpg

Click for full size
 
PaulPool89 said:
I had the same issue. Finally figured out you press FLR and OFF at the same time, THEN you must let go of both buttons, THEN press AUTO within 2 seconds. Make sure it's not below 35 degrees in your cabin.

Cleaned my Headlights, cleaned the chrome 19 wheels, grabbed some rainx wipes, and put in TRICO Onyx Wiperblades.

I used a 16 megapixel camera so you can click on the pics to see full detail.

Rims front after, rear before


Headlights after I did drivers side, and then both done. Passenger came out nicer. They have moisture inside them.
Click to expand...

Looking good:headbang:
 
You must log in or register to reply here.

Members online

No members online now.
Total: 303 (members: 0, guests: 303)
Back
Top